Filter Cup
FITSALL FILTER
ANATOMY
The FitsAll Filter by SteriPEN®
is designed to remove large
particulate matter from drinking
water prior to purication
treatment. The FitsAll Filter
is not designed for removal
of microbial contaminants.
SPECIFICATIONS
Weight: 65g
Minimum bottle opening: 22mm
Nested dimensions:
height – 88mm
width – 95mm
depth – 72mm
Cup dimensions:
height – 76mm
width – 95mm
depth – 72mm
Filter cartridge
Funnel
STORING: Use a clean
cloth to wipe and dry the Filter
cartridge, Cup and Funnel. Push
air vent valve closed and install
the cartridge into the Cup.
Twist cartridge to lock in place.
Turn the Funnel upside
down and place over the
lter cartridge — push down
to secure. This creates the
nested storage position.
DID YOU KNOW?
Because of the FitsAll Filter’s
soft but durable material, it may
be squeezed or compressed to
reduce storage size.
TIP: To help water to ow
freely through the lter, wet
the lter cartridge mesh by
submerging the lter cartridge
in water before use. Rub the
mesh with your nger or a
cleancloth until it becomes
thoroughly saturated.
6 | QUANTUM RAPID PURIFICATION SYSTEM • www.steripen.com
To Next Page
Loading...
