110
Extended Major Components Warranty
The Extended Major Components Warranty covers any failure under normal use and service of any of the below-
listed parts or castings that occurs during the extended warranty period and that is caused by a defect in material or
factory workmanship:
Engine Monoblock Casting
Engine Camshaft
Engine Crankshaft
Engine Connecting Rods
Crankshaft Sprocket
Camshaft Sprocket
Engine Housing
Flywheel Housing
STEYR MOTORS’ Responsibilities under the Extended Major Components Warranty
During the applicable period of coverage under the Extended Major Components Warranty, and subject to the con-
ditions, limitations and exclusions herein, STEYR MOTORS will, at its option, either repair or replace the defective
component. STEYR MOTORS’ responsibilities in the event of a repair shall be the same as provided with respect
to the Base Engine Warranty, except that the cost of labor for removal and reinstallation is not covered under the
Extended Major Components Warranty.
Duration of Coverage
The Extended Major Components Warranty extends for a period of 60 months or until the engine has been operated
for 1,800 hours, whichever occurs first. As with the Base Engine Warranty, the period of coverage commences on
the date on which the Product is delivered to the first retail purchaser or on the date on which the unit is first leased,
rented or loaned, or when the Product has been operated for 30 hours, whichever occurs first.
1
Bushing and bearing failures are not covered.
To Next Page
Loading...
Need help?
General
