22
ATTENTION: In case of non-observance of break-in instructions, warranty may expire.
q
Engine to be filled with recommended oil quality only. See chapter “Engine Lubrication”.
Operation after Break-In
The engines specified in this manual are intended to be operated at different speeds and loads, but not allowing full-
load of the engine for more than one hour per 12 running hours. Economic driving may be achieved at the following
speeds:
MO54NA33 3,000 rpm
MO84K32 3,000 rpm
MO94K33 3,000 rpm
MO114K33 3,000 rpm
MO144M38 3,200 rpm
MO164M40 3,400 rpm
MO174V40 3,400 rpm
MO126M28 2,200 rpm
MO126K25 2,200 rpm
MO156K25 2,200 rpm
MO196M28 2,200 rpm
MO236K42 3,300 rpm
MO256K43 3,600 rpm
MO256H45 3,600 rpm
MO286H43 3,600 rpm
MO306H43W 3,600 rpm
Which will prolong engine life and reduce sound emissions.
When starting a cold engine, always allow the engine to warm up slowly. Never run the engine at full speed until
operating temperature is reached. During the first 50 running hours, check the oil level frequently.
GENERAL
To Next Page
Loading...
Need help?
General
