23
Shifting
1. If the gear shift mechanism is disengaged, move the control lever to neutral position. The shift mechanism will
automatically engage.
2. To go FORWARD – press the neutral lock button if fitted, and move the control lever forward. Throttle move-
ment will begin after forward gear engagement.
3. To go in REVERSE – press the neutral lock button if fitted, and move the control lever backwards. Throttle
movement will begin after reverse gear engagement.
4. To go from FORWARD to REVERSE, or REVERSE to FORWARD, always pause at NEUTRAL and allow
engine speed to return to idle.
5. After shifting is completed, continue to move the control lever slowly in the desired direction to increase speed.
NOTE: A sudden increase in shifting torque on the remote control lever indicates a possible problem
in the shifting system. If so, see your STEYR MOTORS dealer as soon as possible for proper
diagnosis and and necessary service adjustment. Continued operation under this condition
could result in damage to the shifting mechanism.
To Next Page
Loading...
Need help?
General
