EasyManuals Logo

STEYR MO156K25 User Manual

Default Icon
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
20
Run In Procedure After Major Overhaul
The following run in procedure must be used on STEYR MOTORS engines following a major overhaul, where a major
overhaul is defined as a replacement of any or all of the following:
Crank Shaft, Piston(s), Con rod(s), Monoblock
Definitions
* Rated speed Engine speed with maximum power
* Half engine speed Half of rated speed
Procedure, Work steps
Preparation
* Engine filled with oil and coolant to max. levels
* Oil Shell RIMULA ULTRA 10 W 40
* Coolant GLYCOSHELL – 50/50 % water/coolant
* STEYR MOTORS engine diagnostic tool connected to the ECU
Test method
* Remove the expansion tank pressure cap for degassing the system
* Start the engine
* Run at idle speed for 20 min
* Stop the engine
* Check coolant and oil level, top up to max. level if necessary
* Close the expansion tank with the pressure cap
* Start the engine
* Warm up the engine (~15 mins.)
* Run the boat minimum for 4 hrs at no more than half engine speed
* Check oil level, top up to max level
* Check the error list in the ECU using the diagnostic programme, if no errors continue run in. If errors occurred,
contact STEYR MOTORS After Sales department for further decisions
* Warm up the engine (~15 mins.)
* Run the boat minimum for 2 hrs at no more than 75 % engine speed
* Check the service code list in the ECU using the diagnostic program, if no errors continue run in. If errors
occurred, contact STEYR MOTORS After Sales department for further decisions
* Warm up the engine (~15 mins.)
* Start the STEYR MOTORS diagnostic tool data logger
* Run the boat minimum for 20 mins. at full rated speed
* Stop diagnostic tool data logger and save the file (filename: engine number and date
e.g. 68225765_20080910.dat)
* Check the service code list in the ECU. If errors occurred, contact STEYR MOTORS After Sales department for
further decisions
* Send the data Log file to STEYR MOTORS After Sales department
* Check coolant and oil level at cold engine, top up to max. level if necessary
* Continue using the engine acc. to STEYR MOTORS Operator Manual

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the STEYR MO156K25 and is the answer not in the manual?

STEYR MO156K25 Specifications

General IconGeneral
BrandSTEYR
ModelMO156K25
CategoryEngine
LanguageEnglish

Related product manuals