_____________________________________________________________________________________
STI S.r.l. – Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY www.imi-critical.com
Manual 4054 – rev.00 02/2021 – DT2 - 25 -
8. Transport and storage
1) Check whether all kinds of sign are integrality, fully, and the package is firm before storage. Finally, check the
reliability and safety of enswathement.
2) The transport should be light disposal, prohibit impacting, compression, and damp.
3) Stored at -40 ÷ 80°C, relative humidity should be no more than 75% of the room, the air should not contain
harmful and corrosion impurities instrument.
4) Place according to the box’s surface marker, do not reverse.
Information in this manual is protected by copyright. All rights are reserved. No part of this manual and relevant mentioned and/or
enclosed documentation may be reproduced without written authorization by STI S.r.l.
STI S.r.l. is not responsible for possible damage to people, equipment or data which might arise from incorrect use of the product to
which the manual is referred.
Information in this document may be modified at any time without notice.
To Previous Page
Loading...
