STI DigitalTrak2 - 1 General Information; General Warnings; Generalities; Applicable Regulation

INSTRUCTION MANUAL
DigitalTrak2™
_____________________________________________________________________________________
STI S.r.l. – Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY www.imi-critical.com
Manual 4054 – rev.00 02/2021 – DT2 - 3 -
1. GENERAL INFORMATION
1.1 General warnings
This Instruction Manual is an integral part of the device, it should be carefully read before
carrying out any operation and it should be kept for future references.
This Instruction Manual covers only the DT2 positioner.
This Instruction Manual is realized in accordance with the Directive 2006/42/CE.
1.2 Generalities
STI S.r.l positioners are conceived, manufactured and controlled according to the Quality Control System in compliance
with EN-ISO 9001 international regulation.
1.2.1 Applicable regulation
UNI EN ISO 12100-1: 2005: Safety of machinery – Basic notions, general design principles. Part 1-Basic terminology,
method.
UNI EN ISO 12100-2: 2005: Safety of machinery – Basic notions, general design principles. Part 2-Technical principles
and specification.
2006/42/EC: Machine directive.
2006/95/EC: Directive for low voltage equipment.
2004/108/EC: Directive for the electromagnetic compatibility.
1.2.2 Terms and conditions
STI S.r.l. guarantees that all the items produced, if installed, used and subject to maintenance, are without material and
manufacturing defects, and comply with specifications in force. The period of warranty is of one year, starting from the
date of installation by the first user of the product, or of eighteen months as of the date of shipment to the first user,
depending on which event occurs first.
The warranty does not cover special products or components not covered by warranty in their turn by subcontractors, or
materials that were used or installed inappropriately, which were modified or repaired by unauthorized staff.
If the failure was caused by inappropriate installation, maintenance or use, or by irregular working conditions, the
repairs will be charged according to the applicable fees.
1.3 Manufacturer
With respect to Machinery Directive 2006/42/EC the Manufacturer of the described product, is STI S.r.l. as specified on
nameplate.
Address: STI S.r.l.
Via Dei Caravaggi 15
24040 Levate (Bergamo) – ITALY
1.4 Safety precautions
1) Throughout the operation of the positioner, including auto setup, do not touch it.
2) Make sure to disconnect air supply before making any maintenance work on the positioner
3) The products must be correctly installed, operated and maintained.
1.5 Packing list
1) DT2 Intelligent Electropneumatic valve Positioner.
2) User Manual.
3) Ordered kits as option.