INSTRUCTION MANUAL
DigitalTrak2™
_____________________________________________________________________________________
STI S.r.l. – Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY www.imi-critical.com
Manual 4054 – rev.00 02/2021 – DT2 - 4 -
1.6 Safety notices
In order to make you better use this manual and ensure your safety, when debugging, running, repairing this
equipment, please pay attention to the use of following symbols:
Refers to the potential dangers, if can’t avoid, it may
damage the product itself or the surrounding objects.
(Hazardous materials).
Refers to the things which are useful or special neglected
affecting the operating conditions or production function
(Not contain dangerous or harmful situations).
Please read this manual careful before installation and debugging.
1.7 Positioner and manufacturer’s identification
It is forbidden to modify the information and the marks without previous written authorization by STI S.r.l.
The following plate is fastened on the positioner housing:
To Next Page
Loading...