STIEBEL ELTRON DCE-X 10/12 Premium - Settings in the Parameter Menu

OPERATION
Settings and displays
ENGLISH
www.stiebel-eltron.com DCE-X Premium | 7
4.9 Settings in the parameter menu
4.9.1 Activating the parameter menu
 Briefly press and hold "i" for more than 5seconds until "P1"
appears, then continue by briefly pressing "i".
 In the selected parameter menu, turn the temperature selec-
tor to the required display/ setting.
4.9.2 Parameter menu
Menu Description Selectable display | setting Explanation Symbol | display
P1 ECO OFF | ECO1 | ECO2 | ECO3 ECO water and energy saving function:
The ECO function enables you to limit the
flow rate to a maximum value.
– | | |
P2 Temperature limit (child-
proofing)
Temperature (in selected temperature
unit)
Childproofing allows you as a user to
limit the adjustable temperature at the
appliance to a maximum value. Check
that the upper temperature limit has
been correctly applied.
P3 Wellness showers [OFF,
1 - 4]
OFF | 1 | 2 | 3 | 4 The Wellness shower program lets you
choose from different programs for hot/
cold contrast showers.
P4 Automatic water volume
control – set the volume
in the selected unit
OFF | 5 | 10 | ... 200l or 2 ... 52gal The automatic water volume control
allows you to limit the volume of water
at a high flow rate. When the selected
volume of water is reached, the control
automatically reduces the flow rate. The
required temperature is maintained. The
automatic water volume control must be
enabled on each occasion prior to filling
the bath.
P5 Temperature unit C | F Select the temperature unit for all set-
tings.
°C| °F
P6 Volume unit L | GAL Select the volume unit for all settings. l | gal
P7 Time format 24h | 12h
P8 Time setting --:-- Setting for the selected time format. AM | PM (only for 12h)
P9 Operating lock ON | OFF Operation blocked (only when ON)
P10 Reset to factory settings Reset ( ) To reset, see chapter "Further informa-
tion on the parameter menu/ Description
P10".
P11 Resetting the consump-
tion values
Reset ( |
To reset, see chapter "Further informa-
tion on the parameter menu/ Description
P11".
P12 Backlighting Auto | On Enable either continuous illumination, or
automatic illumination when buttons are
pressed or water is drawn off.
P13 Reduce backlighting 100% | 50% ( ) Adjustable display backlighting.
4.9.3 Deactivating the parameter menu
 Exit the menu item by pressing "i" and holding for more than
5seconds. Alternatively: The system exits the menu item au-
tomatically 30seconds after the setting has been completed.