72
WLAN
Visible WLAN transmitters are detected automatically (can take up to 1minute). Make sure that your
router/repeater settings allow additional WLAN subscribers.
Use the "WPS" (WiFi Protected Setup) button for easy wireless home network registration. Alternative-
ly you can input the key manually, or connect to a hidden WLAN network by entering the SSID and key.
If your WLAN range does not cover your entire home, use a wireless repeater if necessary. The repeat-
er increases the WLAN range.
Bluetooth Set up Bluetooth
®
devices.
Registration Registration for use of extended functions (weather data, internet radio, Bluetooth
®
) on the DHECon-
nect.
Termination Terminate registration
Service
Wireless Menu for setting up the wireless connection between the instantaneous water heater and an external
programming unit or a remote control.
Log on programming unit Start wireless learn mode on the programming unit.
Log on other wireless subscribers Start wireless setup mode in the instantaneous water heater via the programming unit, to set up the
wireless connection to an external programming unit or a wireless remote control.
Fault Display device faults.
Contractor contact The qualified contractor can store his contact details here for service cases.
Device details Type | Product ID | QR code. The QR code enables fast access to our internet site from a mobile termi-
nal device (smartphone or tablet).
Service code Accessible to qualified contractors only.
4.4 Mini wireless remote control
Using the mini wireless remote control you can adjust the temper-
ature setting wirelessly. Encoding prevents other wireless remote
controls from changing the settings.
Obstacles can affect the transmission path between device and
mini wireless remote control.
You can use the mini wireless remote control while showering
or bathing.
To Next Page
Loading...
