www.stiebel-eltron.com DHM 6 220 | 15
INSTALLATION
SPECIFICATION
Cleaning the strainer
You can clean the fitted strainer after removing the cold water
supply pipe.
26_02_05_0065_
Checking the earth conductor
Check the earth conductor (in Germany e.g. BGV A3) on the
earth conductor contact of the power cable and on the appli-
ance connector.
Appliance storage
Store the dismantled appliance in a room free from the risk
of frost, as water residues remaining inside the appliance can
freeze and cause damage.
Replacing the power cable
If replacing the cable, use a power cable with 4mm²
cross-section.
15. Specification
15.1 Dimensions and connections
95
28
30
120
190
4,8
165
82
20
b02
b03
c06
c01
D0000018336
DHM
b02 Entry electrical cablesI
b03 Entry electrical cablesII
c01 Cold water inlet Male thread G 3/8 A
c06 DHW outlet Male thread G 3/8 A
To Next Page
Loading...
