EasyManua.ls Logo

STIEBEL ELTRON DHM 6 220 - Installation Procedures and Site Selection; Installation Overview; Installation Site Requirements; Installation Options: Undersink

STIEBEL ELTRON DHM 6 220
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
www.stiebel-eltron.com DHM 6 220 | 9
INSTALLATION
INSTALLATION
Note
Fitting the special aerator supplied provides an optimum
water jet.
10. Installation
10.1 Installation site
Install the appliance in a room free from the risk of frost and near
the draw-off tap.
Ensure that the lateral fixing screws for the cover are always ac-
cessible.
The appliance is only suitable for undersink installation (water
connections at the top).
DANGER Electrocution
Protection rating IP25 is only ensured if the appliance
back panel is fitted.
Always fit the appliance back panel.
10.2 Installation options
Undersink installation, pressure-tested, with pressure-tested
tap
26_02_05_0093

Related product manuals