STIEBEL ELTRON HPA-O 7 S Premium - Electrical Connection; Access to the Terminal Area



 | 17
11. Electrical connection
WARNING Electrocution
 Before working on the appliance, isolate it from the
power supply at the control panel.
Note
The leakage current of this appliance can be >3.5mA.
The connection must only be made by a qualified contractor and
in accordance with these instructions.
You must have permission to connect the appliance from the rel-
evant power supply utility.
Note
Please observe the instructions for the heat pump man-
ager.
The terminals are located in the terminal area of the appliance.
Follow the instructions in the chapter "Preparation/ Preparing
the electrical installation".
 For all connections, use appropriate cables in accordance
with local regulations.
11.1 Access to the terminal area
D0000035356D0000035358
 Push the cover upwards.
D0000035363
1 2
1 Strain relief
2 Terminal area
 Route cables and leads through the strain relief fittings.
If space behind the appliance is limited, the terminal area can be
folded out.
D0000035380
 Undo the screw on the terminal area.
D0000035382