To Next PageTo Next Page
Need help?Do you have a question about the STIEBEL ELTRON WPMW II and is the answer not in the manual?
General| Brand | STIEBEL ELTRON |
|---|---|
| Model | WPMW II |
| Category | Heat Pump |
| Language | English |
Overview of the heat pump manager and its components.
Detailed description of the WPM II heat pump manager and its capabilities.
Instructions on how to handle and use the operating and installation manual.
Guidelines for maintaining and caring for the heat pump manager.
Crucial safety and operational information for users and installers.
Explanation of the different control levels for operating the system.
How to select and adjust operating modes like standby, automatic, and constant modes.
Navigating and adjusting system parameters via the control level 2 menu.
Setting the current time, date, and summer time for system operation.
Configuring holiday or party modes for extended setback or day mode operation.
Displaying and monitoring various system sensor temperatures.
Adjusting heating curves for optimal heating circuit control based on outdoor temperature.
Setting daily heating schedules and switching times for heating circuits.
Configuring daily hot water heating schedules and switching times.
Description and usage of the FE 7 remote control for system adjustment.
List of components included in the standard delivery package.
Instructions for securely mounting the WPMW II enclosure on a wall.
Guidelines for installing the WPMS II unit within a control panel.
Detailed instructions for making electrical connections to the unit.
Proper handling and connection of electrical cables and leads.
Information regarding fuses for connected consumers.
Instructions for connecting the mains power supply safely.
Connecting circulation pumps and mixer circuits.
Connecting and understanding temperature sensor specifications.
Connecting the system via the BUS cable for communication.
Connection array for the FE 7 remote control unit.
Detailed terminal diagram for the WPMW II model.
Detailed terminal diagram for the WPMS II model.
Steps for initializing the BUS communication between system components.
Setting up system configuration based on the commissioning report.
Procedures for resetting the WPM II unit.
Procedures for resetting the IWS (internal control unit).
Overview of parameters and their settings during commissioning.
Detailed explanation of specific parameters for system commissioning.
Procedure for entering the access code for control level 3.
Settings for emergency operation in case of faults.
Selecting the system type, e.g., heat meter or solar differential controller.
Configuring heat-up programs for underfloor heating systems.
Activating and configuring summer operation mode.
Setting frost protection parameters to prevent system freezing.
Enabling the second heat source (HS 2) for heating operation.
Defining the temperature point for switching between heat pump and HS 2 for heating.
Defining the temperature point for switching between heat pump and HS 2 for DHW.
Testing heat pump compressor functionality.
Displaying and managing recorded error codes and faults.
Checking system status, BUS users, and compressor stages.
Guidance on identifying and resolving system faults and errors.
Information on sensor-related faults and their display messages.
Troubleshooting steps for when the heat pump fails to start or run.
Technical specifications for the WPMW II and WPMS II units.
Default factory programmed settings for heating and DHW.
Tables for entering custom heating and DHW program schedules.
Diagram illustrating system connections for configuration 1.
Diagram illustrating system connections for configuration 2.
Diagram illustrating system connections for configuration 3.
Guidelines for environmentally friendly disposal of packaging materials.
