7
Time and date
You can adjust the time and summer time
with the TIME/DATE menu item.
At the factory, summer time is set to begin on
the 25 March and to end on the 25 October.
Open the control ap!
Set the time or
summer time
Holiday and party program
In holiday mode, the heat pump system ope-
rates in setback mode, and frost protection
for DHW heating is active. Holiday mode is
displayed with the flap closed. For the start of
the holidays, the year, month and day are ente-
red; for its end also enter the year, month and
day. The start and end time is always 24:00 h
of the date entered. After the holiday period
has expired, the heat pump system operates
again in accordance with the previous heating
and DHW program.
In party mode you can extend day mode for
central heating by a few hours. This is display-
ed with the flap closed.
For example, if the heating program normally
switches to setback mode at 22:00 h, and you
set the party mode to two hours, then set-
back mode would only begin at 24:00 h.
Open the control ap!
SET DHW NIGHT
SET DHW NIGHT
ACTUAL DHWTMP
back
DHW TEMP
TIME / DATE
SET CLOCK
TIME
TIME
YEAR
MONTH
DAY
SET CLOCK
back
time / date
Holiday/Party
Holiday
Year Start
MONTH Start
DAY Start
To Next Page
Loading...
