STIEBEL ELTRON HPG-I 04 S Premium - Page 36

Repair instructions
HPG-I 04-06-08-12-15 S-CS-DS-DCS
Premium
TQR
Page 36 from 48
D0000095883-c
Message code
Reason for the message
Possible remedy
3-0125
MFG Sensor value "Return temperature
WP" outside the permissible value
range.
The sensor, its wiring and the associated
Check connector, replace if defective.
3-0126
MFG Sensor value "Flow temperature
WP" outside the permissible value
range.
The sensor, its wiring and the associated
Check connector, replace if defective.
3-0127
MFG Sensor value "Volume flow sensor
WP" outside the permissible value
range.
The sensor, its wiring and the associated
Check connector, replace if defective.
3-0128
The communication to the
"Return temperature sensor WP" in the
MFG does not work correctly.
The sensor, its wiring and the associated
Check connector, replace if defective.
3-0129
The communication to the
"Flow temperature sensor WP" in the
MFG does not work correctly.
The sensor, its wiring and the associated
Check connector, replace if defective.
3-0130
The communication to the
"Heating circuit volume flow sensor"
in MFG does not work correctly.
The sensor, its wiring and the associated
Check connector, replace if defective.
5-0003
Multiple occurrence of error message:
1-0003
Remedy the cause. Then perform a reset on
the WPM.
5-0004
Multiple occurrence of error message:
1-0004
Remedy the cause. Then perform a reset on
the WPM.
5-0026
Sensor value of the low pressure sensor
outside the permissible value range.
Check the sensor, its wiring and the
associated connectors, replace if defective.
5-0027
Multiple occurrence of error message:
1-0027
Remedy the cause. Then perform a reset on
the WPM.
5-0049
Multiple occurrence of error message:
1-0049
Remedy the cause. Then perform a reset on
the WPM.