STIEBEL ELTRON UFP 5 h - Country-Specific Approvals and Certifications; Data Table; Details on Energy Consumption; Extreme Operating and Fault Conditions

www.stiebel-eltron.com UFP 5 h | 19
ENGLISH
INSTALLATION
Specication
15.3 Heat-up diagram
The heat-up period depends on the degree of scaling and residual
heat. For the heat-up time for a cold water supply at 10 °C and a
maximum temperature setting, see the diagram.
35 40 45 50 55 60 65 70 75 80 85
0
5
10
15
D0000047175
x Temperature in °C
y Duration in min
15.4 Country-specific approvals and certifications
The test symbols can be seen on the type plate.
15.5 Extreme operating and fault conditions
In the case of faults, a peak temperature of up to 100 °C may briefly
occur in the system.
15.6 Details on energy consumption
Product datasheet: Conventional water heaters to regulation (EU)
no. 812/2013 and 814/2013
UFP 5 h UFP 5h LABS
222158 233076
Manufacturer STIEBEL ELTRON STIEBEL ELTRON
Load profile XXS XXS
Energy efficiency class A A
Energy conversion efficiency % 38 38
Annual power consumption kWh 491 491
Default temperature setting °C 55 55
Sound power level dB(A) 15 15
Daily power consumption kWh 2.276 2.276
15.7 Data table
UFP 5 h UFP 5h LABS
222158 233076
Hydraulic data
Nominal capacity l 5 5
Mixed water volume at
40°C
l 10 10
Electrical data
Rated voltage V 220 230 240 220 230 240
Rated output kW 1.8 2.0 2.2 1.8 2.0 2.2
Rated current A 8.3 8.7 9.1 8.3 8.7 9.1
MCB/fuse rating A 10 10 10 10 10 10
Phases 1/N/PE 1/N/PE
Frequency Hz 50/60 50/60
Application limits
Temperature setting range °C appr ox . 35 – 85 ap prox . 35 – 85
Max. permissible pressure MPa 0 0
Max. flow rate l/min 5 5
Energy data
Standby energy consump-
tion/24h at 65°C
kWh 0.23 0.23
Energy efficiency class A A
Versions
IP rating IP24 D IP24 D
Type of installation Oversink Oversink
Type Open Open
Internal cylinder material PP PP
Thermal insulation material EPS EPS
Casing material PS PS
Colour white white
Connections
Water connection G 1/2 A G 1/2 A
Dimensions
Depth mm 222 222
Height mm 418 418
Width mm 252 252
Weights
Weight kg 3.1 3.1
Guarantee
The guarantee conditions of our German companies do not
apply to appliances acquired outside of Germany. In countries
where our subsidiaries sell our products a guarantee can only
be issued by those subsidiaries. Such guarantee is only grant-
ed if the subsidiary has issued its own terms of guarantee. No
other guarantee will be granted.
We shall not provide any guarantee for appliances acquired in
countries where we have no subsidiary to sell our products.
This will not aect warranties issued by any importers.
Environment and recycling
We would ask you to help protect the environment. After use,
dispose of the various materials in accordance with national
regulations.
GUARANTEE
ENVIRONMENT AND RECYCLING