STIEBEL ELTRON WPF 13 User Manual

76 |WPF | WPF cool www.stiebel-eltron.com
INSTALLATION
Specication
18.17 Data table WPF .... S
Output details apply to new appliances with clean heat exchangers.
The power consumption figures for the integral auxiliary drives are maximum values and may vary subject to operating point.
The power consumption of the integral auxiliary drives is included in the output details of the heat pump (to EN 14511).
WPF 05 S WPF 07 S WPF 10 S WPF 13 S
232922 232923 232924 232925
Outputs to EN 14511
Output at B0/W35 (EN 14511) kW 5.88 7.61 10.31 13.01
Power consumption
Power consumption, emergency/booster heater kW 5.9 5.9 5.9 5.9
Max. power consumption, circulation pump, heating side W 45 45 72 72
Max. power consumption, circulation pump, source side W 76 130 130 130
Power consumptions to EN 14511
Power consumption at B0/W35 (EN 14511) kW 1.23 1.60 2.17 2.74
Coefficients of performance to EN 14511
Coefficient of performance at B0/W35 (EN 14511) 4.78 4.75 4.76 4.75
Sound data
Sound power level (EN 12102) dB(A) 46 50 50 50
Sound pressure level at 1 m distance in a free field dB(A) 38 42 42 42
Sound pressure level at 5 m distance in a free field dB(A) 24 28 28 28
Application limits
Min. application limit on the heating side °C 15 15 15 15
Max. application limit on the heating side °C 60 60 60 60
Heat source application limit (min.) °C -5 -5 -5 -5
Heat source application limit (max.) °C 20 20 20 20
Water hardness °dH ≤3 ≤3 ≤3 ≤3
pH value (with aluminium compounds) 8.0-8.5 8.0-8.5 8.0-8.5 8.0-8.5
pH value (without aluminium compounds) 8.0-10.0 8.0-10.0 8.0-10.0 8.0-10.0
Chloride mg/l <30 <30 <30 <30
Conductivity (softening) μS/cm <1000 <1000 <1000 <1000
Conductivity (desalinating) μS/cm 20-100 20-100 20-100 20-100
Oxygen 8-12 weeks after filling (softening) mg/l <0.02 <0.02 <0.02 <0.02
Oxygen 8-12 weeks after filling (desalinating) mg/l <0.1 <0.1 <0.1 <0.1
Concentration, mono ethylene glycol refrigerant Vol.-% 25-35 25-35 25-35 25-35
Energy data
Energy efficiency class A++/A++ A++/A++ A++/A++ A++/A++
Electrical details
Frequency Hz 50 50 50 50
Emergency/booster heater fuse A 2 x B 16 2 x B 16 2 x B 16 2 x B 16
Control circuit fuse A 1 x B 16 1 x B 16 1 x B 16 1 x B 16
Fuse - compressor A 1 x C16 1 x C16 1 x C25 1 x C25
Rated voltage, emergency/booster heater V 230 230 230 230
Rated control voltage V 230 230 230 230
Rated compressor voltage V 230 230 230 230
Phases, emergency/booster heater 1/N/PE 1/N/PE 1/N/PE 1/N/PE
Control phases 1/N/PE 1/N/PE 1/N/PE 1/N/PE
Compressor phases 1/N/PE 1/N/PE 1/N/PE 1/N/PE
Current (with/without softstarter) A 31/60 30/83 41/100 34/130
Versions
Refrigerant R410 A R410 A R410 A R410 A
Refrigerant capacity kg 1.50 1.90 2.13 2.25
Compressor oil Emkarate RL 32 3MAF Emkarate RL 32 3MAF Emkarate RL 32 3MAF Emkarate RL 32 3MAF
Condenser material 1.4401/Cu 1.4401/Cu 1.4401/Cu 1.4401/Cu
Evaporator material 1.4401/Cu 1.4401/Cu 1.4401/Cu 1.4401/Cu
Type circulation pump heating side Yonos PARA 25/7.0 Yonos PARA 25/7.0 Yonos PARA 25/7.5 Yonos PARA 25/7.5
Type circulation pump soruce side Yonos PARA RS 25/7.5
PWM GT
Stratos PARA 25/1-8 Stratos PARA 25/1-8 Stratos PARA 25/1-8
IP-Rating IP20 IP20 IP20 IP20
Dimensions
Height mm 1319 1319 1319 1319
Width mm 598 598 598 598
Depth mm 658 658 658 658

STIEBEL ELTRON WPF 13 Specifications

General

Brand	STIEBEL ELTRON
Model	WPF 13
Category	Heat Pump
Language	English