Stiga Autoclip M7 User Manual

23
User’s manual
EN
SETTINGS – PROGRAMMING MODE
RAIN SENSOR: Function for setting the robot in case of rain.
•
Enable: in case of rain, the robot returns to the station and remains in
“charging” mode. At the end of the charging cycle, the robot only starts mowing
again if it has stopped raining.
•
Disable: in case of rain, the robot continues to mow.
AUTO SETUP: (only for some versions, see “Technical Specications”), function
for automatically reducing the robot’s mowing time based on the conditions of the
lawn.
•
Enable: the robot reduces the working time based on the conditions of the
grass. When the lawn surface is mowed, the machine automatically sets a
rest period which delays subsequent departures from the charging station.
However, the robot will operate within the set working times.
•
Disable: the robot will work according to the set time and until the batteries
run out.
ENTER
ON
ENTER
RAIN SENSOR:
DATE: function for setting the date.
TIME: function for setting time.
ON
ENTER
DATE DD/MM/YY
MON 00 / 00 / 00

Stiga Autoclip M7 Specifications

General

Brand	Stiga
Model	Autoclip M7
Category	Lawn Mower
Language	English