BATTERY CHARGING AFTER PROLONGED INACTIVITY
Danger - Attention
Do not recharge the robot in explosive and
ammable environments.
1. Supply electricity to the charging station and make sure the
plates are clean.
2. Position the robot inside the charging station.
3. Press the ON key and wait a few seconds for the robot to
turn on completely. Enter the password (if prompted) (See
“Password Entry”). Press “Enter” if the information messages
remain on the display.
4. After a few seconds, the message “CHARGING” will appear
on the display.
5. Press the “PLAY/PAUSE” key (B). The batteries start the
charging cycle.
6. At the end of the charging cycle (approx. 6 hours), press the
“OFF” key (C).
7. Store the robot in a protected and dry place with an ambient
temperature between 10° and 20° C, difcult to reach by
children, animals, other foreign objects, etc.
To Next Page
Loading...
Need help?
General
