TABLE OF CONTENTS
General information. ................................................................................................................................................................... 2
Purpose of the manual. ............................................................................................................................................................... 2
Identication of manufacturer and equipment. ............................................................................................................................ 3
Safety information. ...................................................................................................................................................................... 3
Safety regulations. ...................................................................................................................................................................... 3
Safety devices. ............................................................................................................................................................................ 4
Safety signals. ............................................................................................................................................................................. 5
Technical information. ................................................................................................................................................................ 6
Technical specications............................................................................................................................................................... 6
General description of the appliance........................................................................................................................................... 7
Main parts. .................................................................................................................................................................................. 8
Installation. ................................................................................................................................................................................... 9
Packing and unpacking. .............................................................................................................................................................. 9
Planning of system installation. ................................................................................................................................................... 9
Setting up of the perimeter wire. ................................................................................................................................................11
Setup of the robot’s quick re-entry to the charging station. ........................................................................................................11
Preparation and marking the boundaries of the work areas. .................................................................................................... 12
Installation of perimeter wire. .................................................................................................................................................... 16
Installation of the charging station and power supply unit......................................................................................................... 17
Battery charging on rst use. .................................................................................................................................................... 18
Adjustments. .............................................................................................................................................................................. 19
Adjustment recommendations................................................................................................................................................... 19
Adjustment of cutting height. ..................................................................................................................................................... 19
Use and operation. .................................................................................................................................................................... 20
Obligations for use. ................................................................................................................................................................... 20
Description of robot commands. ............................................................................................................................................... 20
Menu access. ............................................................................................................................................................................ 20
Navigation. ................................................................................................................................................................................ 21
Settings – programming mode. ................................................................................................................................................. 23
Work schedules – programming mode. .................................................................................................................................... 24
Secondary areas – programming mode. ................................................................................................................................... 25
Safety – programming mode. .................................................................................................................................................... 25
Operating mode – programming mode. .................................................................................................................................... 26
Language options – programming mode. ................................................................................................................................. 26
Initial start up – automatic mode. .............................................................................................................................................. 26
Robot safety stop. ..................................................................................................................................................................... 27
Automatic return to the charging station. .................................................................................................................................. 27
Use of the robot in closed areas with no charging station......................................................................................................... 27
Password entry. ......................................................................................................................................................................... 28
Visualising the display during the work phase. ......................................................................................................................... 28
Prolonged inactivity and restarting. ........................................................................................................................................... 29
Battery charging after prolonged inactivity. ............................................................................................................................... 30
Operating tips. ........................................................................................................................................................................... 31
Routine maintenance. ............................................................................................................................................................... 31
Maintenance recommandations. ............................................................................................................................................... 31
Scheduled maintenance table. .................................................................................................................................................. 31
Robot cleaning. ......................................................................................................................................................................... 32
Troubleshooting. ....................................................................................................................................................................... 33
Troubleshooting guide. ............................................................................................................................................................. 33
Part replacement. ...................................................................................................................................................................... 36
Recommendations for replacing parts. ..................................................................................................................................... 36
Battery replacement. ................................................................................................................................................................. 36
Blade replacement. ................................................................................................................................................................... 36
Robot disposal. ......................................................................................................................................................................... 37
Garden example......................................................................................................................................................................... 38
EC declaration of conformity. ................................................................................................................................................... 42
Reproduction, even partial, of this document without written permission by the manufacturer is strictly forbidden. The
manufacturer assumes a policy of continual improvement and reserves the right to modify this document without prior notice
on condition that the changes do not constitute health and safety risks.
© 2008 – Text, illustrations and page layout by Tipolito La Zecca. The text may be reproduced, in whole or in part, on condition
that the author is mentioned.
MD-CT-RO-12-R1.0- STIGA - EN - 10-2017
To Next Page
Loading...
Need help?
General
