Notes:
because of the garden special shape, it is recommended to set the robot work starting from different points (not always from the
charging station) to optimize the cutting performance.
References:
A - B: exiting work in secondary areas. See "Programming". It’s recommended to set two secondary areas to increase the robot
work efciency. It starts to work from different points of the garden.
Programming:
•
secondary areas:
-
area 1- A:
-
percentage: 30%;
-
direction: clockwise;
-
distance: 30m (distance between the charging station and the point "A");
-
area 2- B:
-
percentage: 30%;
-
direction: counter-clockwise;
-
distance: 30m (distance between the charging station and the point "B");
To Next Page
Loading...
Need help?
General
