EN - 10
3. Neutral position. The pedal
NOTE If the drive pedal is used, whether
forwards or for reverse, when the parking brake
(g. 10.D) is engaged, the engine stops.
5.8
DISENGAGEMENT LEVER
1. Drive engaged : for all uses,
.
2. Drive disengaged :
.
IMPORTANT To avoid damaging the
transmission unit, this operation must be
carried out only when the engine has stopped
with the pedal (g. 10.J) at neutral position.
5.9 CUTTING MEANS ENGAGE AND
1. Cutting means engaged.
2. Cutting means disengaged.
• On disengaging the cutting
NOTE If you engage the cutting means
without taking the necessary safety
precautions, the engine shuts down and
cannot be restarted (see par. 6.2.2)
5.10 REVERSE GEAR CUTTING
CONSENT BUTTON
5.11
The seven positions for this lever,
correspond to various cutting
5.12 ACOUSTIC ALARM INDICATOR
•
•
6.2.2).
•
grass catcher is full (see par. 6.5.5).
5.13 GRASS CATCHER TIPPING
6. USING THE MACHINE
The safety regulations to follow
are described in chap. 2. Strictly
comply with these instructions to
avoid serious risks or hazards.
To Next Page
Loading...
