EN - 12
PROBLEM PROBABLE CAUSE SOLUTION
12.
not engage or do not
loose belt
problems with the electro-
magnetic clutch
Uneven mowing and
not parallel to the ground
collector chute is blocked
14. Uneven mowing
(side discharge
not parallel to the ground
15. Unusual vibrations
while working
the cutting means are
unbalanced or loose
loose bolts and screws
16. Uncertain or
17.
movement, poor drive
when going uphill or
problems with the belt or
the engagement device
18. When the engine is
running, the machine
when the drive
pedal is pressed
release lever in the gear
disengagement position
return it to the gear engaged position (par. 4)
19. Unusual machine
vibrations
damaged or loose parts
have all checks, repair work and
NOTE If problems persist after having performed the de-
scribed operations, contact your dealer.
NOTE For further problems not listed in the table, contact an
authorised service centre immediately.
To Next Page
Loading...
Need help?
General
