Stihl 036 QS User Manual

Different air filters may be installed to
adapt the machine to the prevailing
operating conditions:
)DEULFILOWHU for normal cutting
conditions and winter operation
)OHHFHILOWHU for dry and very dusty
work areas
&OHDQWKHDLUILOWHU
ZKHQWKHUHLVDQRWLFHDEOHORVVRI
HQJLQHSRZHU
•
Set Master Control lever  to O.
•
Turn the twist lock  above the
rear handle 90° counterclockwise
(lower illustration).
•
Lift off the carburetor box cover 
vertically.
•
Clean away loose dirt from around
filter.
•
Unscrew the slotted nuts.
•
Remove filter.
•
Separate the two halves of the filter.
•
Take the foam element  out of
the front half of the filterand
clean or replace it.
•
Knock out both elements or blow
out with compressed air from the
inside outward.
$IWHU)LQLVKLQJ:RUN
•
Slacken off the chain if you have
retensioned it at operating
temperature during cutting work.
The chain contracts as it cools down.
If it is not slackened off, it could damage
the crankshaft and bearings.
%HIRUHVWRULQJ\RXUVDZ
IRUDORQJSHULRG
See chapter “Storing the machine”.
138BA002K
4
138BA005K
$LU)LOWHU6\VWHP
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
 46

Stihl 036 QS Specifications

General

Brand	Stihl
Model	036 QS
Category	Chainsaw
Language	English