Stihl 038 - Specifications

After sharpening
Clean the chain thoroughly, remove
filings or grinding dust - lubricate the
chain by immersing it in an oil bath.
Before long out-of-service period
Clean the chain with a brush and
immerse it in an oil bath.
Please quote the following details
when ordering a new chain:
Chain type, e.g. Rapid-Super,
Chain pitch, e.g. 3/8"
Number of drive links, e.g. 72
Bar length, e.g. 50 cm (20°)
Storing the machine
For periods of about 3 months or longer:
Drain and clean the fuel tank.
Run engine until carburetor is dry -
this helps prevent the carburetor
diaphragms sticking together.
Remove the saw chain and guide
bar, clean them and protect
with corrosion inhibiting oil.
Thoroughly clean the machine -
pay special attention to the
cylinder fins and air filter.
If you use Bioplus, fill the chain oil
tank.
Store the machine in a dry, high
or locked location - out of the
reach of children and other
unauthorized persons.
49