Stihl 038 - Maintenance Chart

Maintenance Chart
Please note that the following maintenance intervals apply for normal operating con-
ditions only. If your daily working time is longer than normal or cutting conditions are
difficult (very dusty work area tropical wood etc.) shorten the specified intervals ac-
cordingly.
refueling stop
after finishing work or daily
after each weekly monthly if faulty if damaged as required
| Complete machine
Visual inspection (condition, leaks:
Clean
Throttle trigger , throttle trigger interlock,
Master Control, depending on modet Check operation
F
Check
operation
27
Snes Clean by STIHL dealer
Filter in fuel tank Check =a
Clean, Replace filter element Se Sa Ss l a a a)
Fuel tank Clean
Chain oil tank Clean
Chain lubrication Check x 34, 35
Inspect, also check sharpness X
Saw chain Check chain tension x 35
_ Sharpen 45
Check (wear, damage) x 34
Guide bar Clean and turn over
Deburr
Replace
Chain sprocket Check
Air filter |-Glean
Replace eoria
Cooling inlets Clean
Cylinder fins Clean A
Check idle adjustment — chain must not tum F
Carburetor E
Readjust idle
Spark plug Readjust electrode gap
All accessible screws and nuts RPNE
(not adjusting screws)” Retighten
Inspect
purna Noraini Have replaced by STIHL dealer i
Inspect X ee ot
Muffler Inspect spark arrestor screen x
Clean or replace spark arrestor screen x
A Check x
Chain catcher Replace 7
50