Need help?Do you have a question about the Stihl 038 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Chain Pitch | 3/8" |
| Displacement | 61.5 cm³ |
| Power Output | 3.0 kW |
| Guide Bar Length (recommended) | 40-50 cm |
| Ignition System | Electronic |
| Chain Gauge | 1.6 mm |
Requirements for the chainsaw operator's physical and mental state.
Guidelines for appropriate and safe clothing when operating the chainsaw.
Instructions for safely carrying and transporting the chainsaw.
Steps required before starting chainsaw operation.
Safe procedures for refueling the chainsaw with fuel mix.
Step-by-step guide for starting the chainsaw engine.
Important considerations for safe operating environments and conditions.
Notes on essential adjustments for optimal performance and safety.
Proper hand grip technique for safe chainsaw operation.
Explanation of kickback and how it occurs.
Information on devices designed to minimize kickback risks.
The process of cutting down a tree.
Step-by-step guide for felling trees safely.
Method for making a standard felling cut.
An alternative felling notch technique.
How to make sapwood cuts for specific tree types.
The primary cut made during tree felling.
Technique for felling large trees using multiple cuts.
A felling cut method for smaller trees.
A dangerous felling technique for specific timber sizes.
Removing branches from a fallen tree.
Information on the shelf life and storage of fuel mix.
Instructions for filling the chain oil tank.
Detailed steps for attaching the saw chain to the sprocket.
Procedures for engaging the chain brake.
Procedures for disengaging the chain brake.
Schedule and procedures for maintaining the chain brake.
Recommendations for the initial use of a new chainsaw.
Advice on running the chainsaw during use.
Information on spark plug condition and maintenance.
Overall procedure for starting the chainsaw.
Methods for starting the chainsaw engine.
Specific technique for starting the saw while it's on the ground.
Information on the guide bar's function and maintenance.
Procedure for breaking in a new Oilomatic saw chain.
Ensuring proper lubrication of the saw chain.
Critical importance of correct chain tension.
Information on the chain sprocket and its wear.
Initial adjustment procedure for the carburetor.
Guidance for adjusting the engine's idle speed.
Steps for removing the chainsaw's side plate.
Procedure for replacing the spur sprocket.
Information on replacing the rim sprocket.
Steps for replacing a damaged starter rope.
How to install the spring clip in the starter assembly.
Proper method for tensioning the rewind spring.
Characteristics of a properly sharpened saw chain.
Procedures for cleaning and inspecting the saw chain.
Guidance on replacing individual components of the saw chain.
Choosing the correct tools based on chain pitch.
Importance of using specific files for chain sharpening.
Critical angles to maintain during chain cutter resharpening.
Ensuring all chain cutters are of uniform length for performance.
Understanding and setting the depth gauge for optimal cutting.
Process for adjusting depth gauges during sharpening.
Various tools and aids for chain filing and sharpening.
Proper technique for filing chainsaw chain cutters.
To Next Page
