Stihl 088 - Engine; Exhaust Muffler and Spark Arresting Screen

STIHL 088 15
• Ease away the clips (1).
• Remove the retainers (2).
• Remove the muffler (3).
• Take out the screws (1).
• Remove the cover (2).
• Remove the exhaust gasket.
Reassemble in the reverse
sequence.
Muffler with spark
arresting screen
• Take out the screws (1)
• Remove the strap (2 )
• Take out the screws.
• Remove the spark arresting
screen.
- Clean the spark arresting screen
or fit a new one.
4. ENGINE
4.1 Exhaust Muffler/S
p
ark Ar
r
estin
g
Screen
Troubleshooting chart - see
"Standard Repairs, Troubleshooting"
handbook.
- Remove the shroud - see 4.8.
Muffler without spark arresting
screen
• Take out the screws (1).
• Remove the cover (2).
- Fit the cover so that the stub
points away from the exhaust
port.