Stihl 088

STIHL 088 8
• Unscrew the spark plug.
• Push the locking strip
0000 893 5903 into the cylinder.
• Fit cover washer so that "TOP"
faces outward.
• Unscrew the clutch from the
crankshaft in the direction of the
arrow (left-hand thread).
- Disassemble and reassemble the
clutch - see "Standard
Repairs, Troubleshooting"
handbook.
- Remove the cover washer.
3.2 Clutch
Troubleshooting chart - see
"Standard Repairs, Trouble-
shooting" handbook.
- Remove clutch drum/chain
sprocket - see 3.1.
- Remove decompression valve
- see 4.8.
• Screw clutch onto crankshaft and
torque down to 80 Nm
(59 Ibf.ft).
- Remove locking strip from
cylinder.
- Install spark plug and torque
down to 25 Nm (18.5 Ibf.ft).
Important: If spark plug has a
separate terminal nut, make sure that
it is properly tightened down.
- Install decompression valve
- see 4.8.
- Install clutch drum/chain
sprocket - see 3.1.