Stihl 088 - Page 52

STIHL 088 52
10.5 Fuel Hoses
Outer fuel hose
- Remove carburetor - see 10.2.1.
Inner fuel hose
- Disconnect the pickup body -
see 10.4.
- Pull off the outer fuel hose.
Pickup bod
y
• Use the assembly hook (1)
5910 893 8800 to pull the pickup
body out of the fuel tank.
Note: Do not stretch the fuel hose
while removing it.
• Pull the pickup body off the fuel
hose.
- Fit a new pickup body.
Reassemble in the reverse
sequence.
• Pull out the fuel hose. • Pry the flange of the fuel hose
out of the fuel tank.
- Pull out the fuel hose.
Reassemble in the reverse
sequence.
• Pull fuel hose (1) off the
connector (2).
- Coat the flange of the fuel hose
with a little oil.
• Straight side (1) of flange must
locate against tank housing.