76 Series 4144 Components FC, FS, KM
10. Special Servicing Tools
New Special Servicing Tools
No. Part Name Part No. Application Rem.
1 Clamp 5910 890 1100 Removing and installing bearing
housing
No. Part Name Part No. Application Rem.
1 Locking strip 0000 893 5904 Blocking the crankshaft
2 Pump 0000 850 1300 Testing engine and carburetor for leaks
3 Nipple 0000 855 9200 Testing engine and carburetor for leaks
4 Hose for leakage test 1110 141 8600 Testing carburetor for leaks
5 Screwdriver Q-SW 8x200 5910 890 2420 Carburetor nuts
6 Crimping tool 5910 890 8210 Attaching connectors to electrical wires
7 Torque wrench 5910 890 0301 0.5 to 18 Nm
8 Torque wrench 5910 890 0311 6 to 80 Nm
9 Screwdriver Q-T 27x150 5910 890 2400 All IS screws
10 Hook 5910 893 8800 Removing pickup body
11 Installing tool 5910 890 2204 Installing and flaring rope guide
bushing
12 Puller 5910 890 4501 Removing limiter cap
13 Screwdriver 5910 890 2305 Low speed, high speed and idle speed
screws
14 Setting disk 5910 893 6600 Adjusting the Carburetor
15 Ignition system tester, ZAT 4 5910 850 4503 Testing ignition system
16 Ignition system tester, ZAT 3 5910 850 4520 Testing ignition system
To Next Page
Loading...
Need help?
General
