FR 130 T
English
20
NOTICE
Remove the tool used to block the shaft.
Removing the Metal Cutting Attachment
WARNING
Wear protective gloves to reduce the 
risk of direct contact with the sharp 
cutting edges.
N Block the shaft.
N Unscrew the mounting nut 
clockwise.
N Remove cutting attachment and its 
mounting hardware from the 
gearbox – but do not remove the 
thrust plate (7).
Your engine requires a mixture of 
gasoline and engine oil.
WARNING
For health reasons, avoid direct skin 
contact with gasoline and avoid inhaling 
gasoline vapor.
STIHL MotoMix
STIHL recommends the use of STIHL 
MotoMix. This ready-to-use fuel mix 
contains no benzol or lead, has a high 
octane rating and ensures that you 
always use the right mix ratio.
STIHL MotoMix uses STIHL HP Ultra 
two-stroke engine oil for an extra long 
engine life. 
MotoMix is not available in all markets.
Mixing Fuel
NOTICE
Unsuitable fuels or lubricants or mix 
ratios other than those specified may 
result in serious damage to the engine. 
Poor quality gasoline or engine oil may 
damage the engine, sealing rings, hoses 
and the fuel tank.
Gasoline
Use only high-quality brand-name 
gasoline with a minimum octane rating 
of 90 – leaded or unleaded.
If your machine is equipped with a 
catalytic converter, you must use 
unleaded gasoline.
NOTICE
A few tankfuls of leaded gasoline will 
greatly reduce the efficiency of the 
catalytic converter.
Gasoline with an ethanol content of 
more than 10% can cause running 
problems in engines with a manually 
adjustable carburetor and should not be 
used in such engines.
Engines equipped with M-Tronic deliver 
full power when run on gasoline with an 
ethanol content of up to 25% (E25).
Engine oil
Use only high-quality two-stroke engine 
oil – preferably STIHL HP, HP Super or 
HP Ultra, which are specially formulated 
for use in STIHL engines. HP Ultra 
guarantees high performance and a 
long engine life.
These engine oils are not available in all 
markets.
Use only STIHL 50:1 two-stroke engine 
oil for the fuel mix in models with a 
catalytic converter.
Mix Ratio
STIHL 50:1 two-stroke engine oil: 50 
parts gasoline to 1 part oil
Fuel