FS 250, FS 250 R
English
41
Spacer
Check X
Have replaced by servicing dealer
1)
XX
All accessible screws and nuts (not adjust-
ing screws)
Retighten X
Anti-vibration elements
Check
2)
XXX
Have replaced by servicing dealer
1)
X
Cutting attachment
Visual inspection XX
Replace X
Check tightness XX
Metal cutting attachment Sharpen XX
Gearbox lubrication (with screw plug)
Check XXX
Replenish X
Safety labels Replace X
1)
STIHL recommends an authorized STIHL servicing dealer.
2)
see chapter "Inspections and Maintenance by Dealer", section "Antivibration Elements"
3)
Not fitted in all markets, see chapter "Inspections and Maintenance by Dealer", section "Spark Arrestor in Muffler and Spacer"
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required