FS 300, FS 350, FS 380
English
59
Permissible combinations
Choose the proper combination from the
table depending on the cutting
attachment.
WARNING
For safety reasons only the cutting
attachments and deflectors and/or limit
stops within one line of the table may be
combined with one another. Other
combinations are not permissible – risk
of accidents!
Cutting attachments
Mowing heads
1 STIHL TrimCut 41-2
2 STIHL PolyCut 41-3
Metal cutting attachments
3 Brush knife 305-2 “Spezial”
(special)
(Ø 305 mm)
4 Brush knife 300-3
(Ø 300 mm)
5 Shredder blade 270-2
(Ø 270 mm)
6 Circular saw blade 200 scratcher
tooth
(Ø 200 mm)
7 Circular saw blade 200 chisel tooth
(Ø 200 mm)
8 Circular saw blade 225 chisel tooth
(Ø 225 mm)
WARNING
Brush knives, shredder blades and
circular saw blades of other, non-metal
materials must not be used.
Deflectors, limit stops
Deflectors
9 Deflector only for mowing heads
10 Deflector with
11 Skirt and blade only for mowing
heads
12 Deflector without skirt and blade for
metal mowing attachments,
items 3 and 4
13 Deflector for shredder blade
Limit stops
14 Limit stop for circular saw blades
200 mm diameter
15 Limit stop for circular saw blades
225 mm diameter
Harnesses
16 A shoulder strap must be used
17 A full harness can be used
18 A full harness must be used
N Hold the lower clamp (1) steady.
N Unscrew and remove the clamping
screw (2). The clamps are loose
once the clamping screw has been
removed.
N Remove the upper clamp (3) from
the lower clamp.
Mounting the Bike Handle
To Next Page
Loading...
