FS 300, FS 350, FS 380
English
71
The machine will balance differently
depending on the cutting attachment
mounted.
N Let the machine swing on the
harness until it stops moving –
change the connection point if
necessary
Mowing attachments
Mowing heads, brush knives and
shredder blades should rest lightly on
the ground.
Circular saw blades
Circular saw blades should "hover"
approx. 20 cm above the ground.
Important:
Correct adjustment of the brushcutter on
the harness results in better
ergonomics.
Controls
Control handle on handlebar
1 Throttle trigger lockout
2 Throttle trigger
3 Slide control
Balancing the Machine
To Next Page
Loading...
