FS 40, FS 40 C, FS 50, FS 50 C
English
28
Cutting tool
Visual inspection XX
Replace X
Check tightness XX
Safety labels Replace X
1)
not in all versions, market-specific
2)
STIHL recommends a STIHL servicing dealer.
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
if required
To Next Page
Loading...
