Stihl FS 56 - Page 23

To Next Page

To Previous Page

22 Series 4144 Components FC, FS, KM

: Fit the wires, ground wire (1) first,

in the guide – position the wires

next to one another without

loops.

: Push the support (1) into position

so that the tabs engage the

guides (arrows) and the interlock

lever (2) engages the underside

of the throttle trigger.

: When pushing the into position,

check that its pegs engages the

holes (arrows).

545RA067 TG

545RA068 TG

545RA069 TG

: Push the support fully home and

position the wires, short circuit

wire first, in the guide (arrow).

: Push the short circuit into the

guides (arrows) first, then the

ground wire.

Lay the wires next to one another

without crossing over.

: Fit the short circuit wire (1) in the

guide (arrow).

545RA070 TG545RA094 TG545RA071 TG

: Push short circuit wire (1) and

ground wire (2) firmly onto the

connector tags.

– Reassemble all other parts in the

reverse sequence.

– Tightening torques, b 3.4

– Check operation.

545RA045 TG

Other manuals for Stihl FS 56