EasyManuals Logo

Stihl FS 56 Service Manual

Stihl FS 56
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
2 Series 4144 Components FC, FS, KM
1. Introduction
This service manual contains
detailed descriptions of all the repair
and servicing procedures specific to
this power tool.
You should make use of the
illustrated parts lists while carrying
out repair work. They show the
installed positions of the individual
components and assemblies.
Refer to the latest edition of the
relevant parts list to check the part
numbers of any replacement parts.
A fault on the machine may have
several causes. To help locate the
fault, consult the troubleshooting
charts for all assemblies and
systems in this manual and the
"STIHL Service Training System".
Refer to the “Technical Information”
bulletins for engineering changes
which have been introduced since
publication of this service manual.
Technical information bulletins also
supplement the parts list until a
revised edition is issued.
The special tools mentioned in the
descriptions are listed in the chapter
on "Special Servicing Tools" in this
manual. Use the part numbers to
identify the tools in the
"STIHL Special Tools" manual. The
manual lists all special servicing
tools currently available from
STIHL.
Symbols are included in the text and
pictures for greater clarity.
The meanings are as follows:
In the descriptions:
: = Action to be taken as
shown in the illustration above
the text
= Action to be taken that is
not shown in the illustration
above
the text
In the illustrations:
A Pointer
aDirection of movement
@ 4.2 = Reference to another
chapter, i.e. chapter 4.2
in this example
Service manuals and all technical
information bulletins are intended
exclusively for the use of properly
equipped repair shops. They must
not be passed to third parties.
Always use original STIHL
replacement parts.
They can be identified by the STIHL
part number,
the {
logo and the
STIHL parts symbol K
This symbol may appear alone on
small parts.
Storing and disposing of oils and
fuels
Collect fuel or lubricating oil in a
clean container and dispose of it
properly in accordance with local
environmental regulations.

Table of Contents

Other manuals for Stihl FS 56

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl FS 56 and is the answer not in the manual?

Stihl FS 56 Specifications

FS 56

Power IconPower
engine power0.8 kW (1.1 hp)
max output shaft speed8600 rpm
idle speed2800 rpm
Engine Specifications IconEngine Specifications
displacement27.2 cm³
cylinder bore34 mm
piston stroke30 mm
Fuel System IconFuel System
fuel tank capacity340 cm³ (0.34 l)
carburetor typeAll-position diaphragm carburetor with integral fuel pump
Noise and Vibration Data IconNoise and Vibration Data
sound pressure level with mowing head93 dB(A)
sound pressure level with metal tool94 dB(A)
sound power level107 dB(A)
Ignition System IconIgnition System
spark plugNGK CMR 6 H, BOSCH USR 4AC
electrode gap0.5 mm
ignition typeElectronic magneto ignition
Weight and Dimensions IconWeight and Dimensions
weight5.1 kg

FS 56 R

Noise and Vibration Data IconNoise and Vibration Data
sound pressure level with mowing head93 dB(A)
sound pressure level with metal tool94 dB(A)
sound power level107 dB(A)
Weight and Dimensions IconWeight and Dimensions
weight4.7 kg

FS 56 C

Noise and Vibration Data IconNoise and Vibration Data
sound pressure level with mowing head93 dB(A)
sound pressure level with metal tool94 dB(A)
sound power level107 dB(A)
Weight and Dimensions IconWeight and Dimensions
weight5.2 kg

FS 56 RC

Noise and Vibration Data IconNoise and Vibration Data
sound pressure level with mowing head93 dB(A)
sound pressure level with metal tool94 dB(A)
sound power level107 dB(A)
Weight and Dimensions IconWeight and Dimensions
weight4.8 kg

Related product manuals