0458-726-9921-A
50
English
7 Adjusting Trimmer for User
The connecting cable can be secured in position by the
guide (1) on the harness and the fasteners (2), or on the side
of the backplate with the fasteners (2).
The length of the connecting cable can be adjusted by
making a loop on the backplate (3) or at one side (4).
► Arrange the connecting cable so that it is as short as
possible without hindering your work.
7.1.2 Fitting and Adjusting the Carrying System
► Put the battery on your back.
► Close buckle (2) on the waist belt.
► Close buckle (1) on the chest strap.
► Tighten the straps until the waist belt fits snugly on your
hips and the back padding is against your back.
► Thread the end of the waist belt through the loop (3).
► Fit the hip pad as described in the instructions supplied
with the hip pad.
0000-GXX-2801-A0
1
2
2
2
2
2
2
To Next Page
Loading...
