EasyManua.ls Logo

Stihl FSA 130 - Operating Procedures

Stihl FSA 130
164 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0458-726-9921-A
43
English
4 Safety Precautions
WARNING
If components do not comply with safety requirements,
they will no longer function properly and safety devices
may be rendered inoperative. This can result in serious
injuries.
Work only with an undamaged deflector.
If you are using the line limiting blade and skirt: Work
with a correctly fitted line limiting blade and skirt.
If you have any queries: Contact your STIHL servicing
dealer.
4.6.3 Mowing Head
The mowing head is in a safe condition if the following points
are observed:
The mowing head is not damaged.
The mowing head is not jammed.
The mowing lines are properly installed.
WARNING
If they are in an unsafe condition, parts of the mowing
head or mowing lines may come off and be thrown at high
speed. This can result in serious injuries.
Work only with an undamaged mowing head.
Never use metal elements in place of the nylon mowing
lines.
If you have any queries: Contact your STIHL servicing
dealer for assistance.
4.6.4 Metal cutting attachment
The metal cutting attachment is in a safe condition if the
following points are observed:
The metal cutting attachment and mounting hardware are
undamaged.
The metal cutting attachment is not warped.
The metal cutting attachment is properly mounted.
The metal cutting attachment is correctly sharpened.
WARNING
If it is not in an safe condition, parts of the metal cutting
attachment may come off and be thrown at high speed.
This can result in serious injuries.
Never work with a damaged metal cutting attachment or
damaged mounting hardware.
Sharpen the metal cutting attachment correctly.
Have the metal cutting attachment balanced by a STIHL
servicing dealer.
If you have any queries: Contact your STIHL servicing
dealer.
4.7 Operation
WARNING
The user cannot concentrate on the work in certain
situations. The user may stumble, fall and be seriously
injured.
Work calmly and carefully.
If light and visibility are poor: Do not use your trimmer.
Operate the trimmer alone.
Keep the cutting attachment close to the ground.
Watch out for obstacles.
Stand on the ground while working and keep a good
balance.
If you begin to feel tired: Take a break.
The rotating cutting attachment can cut the user. This can
result in serious injuries.
Do not touch the rotating cutting attachment.
If the cutting attachment is blocked by an object: Switch
off the trimmer and pull the connecting cable plug out of
the socket. Then remove the object causing the
blockage.

Table of Contents

Related product manuals