0458-726-9921-A
54
English
8 Inserting and Removing Connecting Cable Plug
► Let go of the trimmer and check to see how it is balanced
- the cutting attachment should just rest on the ground.
► If the trimmer cannot be balanced: Change the attachment
point of the carabiner (1) on the carrying strip (2) and
check balance again.
7.5 Adjusting the Bike Handle
The bike handle can be set to different positions to suit the
height and reach of the user.
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► Loosen the wing screw (1).
► Swing the bike handle (2) to the required position.
► Tighten down the wing screw (1) firmly.
8.1 Inserting the Connecting Cable Plug
► Hold connecting cable plug (1) so that the arrow on its side
lines up with the arrow on the socket (2).
► Insert the connecting cable plug (1) in the socket (2).
The plug (1) engages in position.
8.2 Removing the Connecting Cable Plug
► Grip the connecting cable plug (1) with your hand.
► Pull the plug (1) out of the socket (2).
8 Inserting and Removing Connecting
Cable Plug
To Next Page
Loading...
