FSE 31, FSE 41
English
14
N Make sure you have a secure and
balanced footing.
N Hold your trimmer with both hands –
right hand on the control handle –
left hand on the assist handle.
N Stand upright – hold the trimmer in a
relaxed position and always on right
side of your body.
N Make sure the cutting attachment is
not touching the ground or any other
objects.
N Squeeze the trigger switch (1).
N Release the trigger switch.
WARNING
Note that the cutting attachment
continues to run for a short period after
you let go of the switch – flywheel effect.
During longer work breaks – disconnect
the plug from the wall outlet.
When the power tool is not in use, store
it in such a way that it does not endanger
others.
Secure it against unauthorized use.
For periods of 3 months or longer
N Thoroughly clean the machine,
especially the cooling air inlets.
N Take out the spool, clean it and
check it for damage.
The resilience and service life of the
nylon line can be increased by storing it
in a container filled with water.
N Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Switching On
To Next Page
Loading...
