FSE 31, FSE 41
English
7
of 15 meters of your own 
position. To reduce the risk of 
damage to property, also 
maintain this distance from 
other objects (vehicles, 
windows). Even maintaining a 
distance of 15 meters or more 
cannot exclude the potential 
danger.
To reduce the risk of injury 
from thrown objects, never 
operate the power tool without 
the proper deflector for the 
type of cutting attachment 
being used.
Do not cut wet grass.
Take care in slippery 
conditions on slopes and 
uneven ground.
Keep the connecting cord 
behind the power tool at all 
times – do not walk backwards 
– risk of stumbling.
Watch out for obstacles: 
Roots and tree stumps which 
could cause you to trip or 
stumble.
Always stand on the ground 
while working, never on a 
ladder, work platform or any 
other insecure support.
Be particularly alert and 
cautious when wearing 
hearing protection because 
your ability to hear warnings 
(shouts, alarms, etc.) is 
restricted.
To reduce the risk of 
accidents, take a break in 
good time to avoid tiredness 
or exhaustion.
Work calmly and carefully – in 
daylight conditions and only 
when visibility is good. Stay 
alert so as not to endanger 
others.
Special care must be taken 
when working in difficult, over-
grown terrain.
Check the cutting attachment 
at regular short intervals 
during operation or 
immediately if there is a 
noticeable change in cutting 
behavior:
– Switch off the power tool, 
hold it firmly and press the 
cutting attachment into the 
ground to bring it to a 
standstill, and disconnect 
the plug from the power 
supply.
– Check condition and 
tightness, look for cracks.
– Replace damaged cutting 
attachments immediately, 
even if they have only 
superficial cracks.
– Clean grass and plant 
residue off the cutting 
attachment mounting at 
regular intervals – remove 
any build up of material 
from the cutting 
attachment and deflector.
Always switch off the power 
tool and unplug it from the 
power supply before replacing 
the cutting attachment This 
avoids the risk of injury from 
the motor starting 
unintentionally.
Inspect the work 
area: Stones, 
pieces of metal or 
other solid objects 
may be thrown 
more than 15 
meters and cause 
personal injury or 
damage the cutting 
attachment and 
property (e.g. 
parked vehicles, 
windows).