Stihl FSE 71 - Approved Combinations of Cutting Tool, Deflector, Handle and Harness

9FSE 60, FSE 71, FSE 81
English
Cutting tools
1 STIHL AutoCut C 5-2 mowing head
2 STIHL AutoCut 5-2 mowing head
Deflector
3 Deflector with blade for mowing
heads only (see “Mounting the
Deflector”
Handle
4 Loop handle
Harness
5 Shoulder strap may be used
Equipment
Among other parts, the complete
trimmer includes:
– Cutting tool
– Deflector
– Handle
– Shoulder strap (special accessory)
Approved Combinations
Select correct combination from the
table according to the cutting tool you
intend to use.
For safety reasons only the tool,
deflector, handle and harness
versions shown in the table may be
used together. No other
combinations are permitted
because of the risk of accidents
and personal injury.
Only mowing heads (1, 2) may be used
on trimmers with a curved drive tube and
loop handle.
To reduce the risk of personal injury,
take special care to avoid contact
with the rotating cutting tool.
Approved Combinations of Cutting Tool, Deflector, Handle
and Harness
Cutting tool Deflector Handle Harness/Strap
Schnur/LINE 2
681FK213 KN
Schnur/LINE 1
1
002BA000 KN
2
3
4
0
02BA125 KN
5