11FSE 60, FSE 71, FSE 81
English
: Push the deflector (1) onto the
clamp (2) as far as stop.
: Fit the locknut (3) in the hex recess
on the deflector.
: Make sure the holes line up.
: Insert the M6x30 screw (4) and
tighten it down firmly.
Preparations
: Switch off the motor.
: Lay your trimmer on its back with
the loop handle pointing down and
the output shaft facing up.
Mounting STIHL AutoCut C 5-2
Mowing Head
: Slide the mowing head (1) over the
shaft (2) and engage hexagon
recess (3) on external hexagon (4).
Mounting the Deflector
1
238BA003 KN
2
238BA004 KN
4
3
Mounting Cutting Tools
238BA005 KN
3
2
1
282BA002 KN
4
To Next Page
Loading...
