4
English
FSE 60, FSE 71, FSE 81
The plug and coupling of the extension
cord must be waterproof and positioned
so that they cannot come into contact
with water.
Only use cutting attachments and
accessories that are explicitly approved
for this power tool model by STIHL or
are technically identical. If you have any
questions in this respect, consult a
specialist dealer. To reduce the risk of
accidents or damage to the machine,
use only high quality tools and
replacement parts.
STIHL recommends the use of STIHL
original tools and accessories. The
characteristics of these components are
specifically designed to match your
machine and meet your performance
requirements.
The deflector provided with your
machine may not protect the operator
from all foreign objects (stones, glass,
wire, etc.) thrown by the rotating cutting
attachment. Thrown objects may also
ricochet and strike the operator.
Clothing and Equipment
Wear proper protective clothing and
equipment.
Clothing must be sturdy
but allow complete
freedom of movement.
Wear snug-fitting clothing
– an overall and jacket
combination is
recommended, do not wear a coat.
Do not wear loose-fitting garments,
scarves, jewelry or anything that could
restrict movement or become entangled
with wood, brush or moving parts of the
machine. Tie up and confine long hair
(e.g. with a hair net, cap, hard hat, etc.).
Wear sturdy shoes
with non-slip soles.
To reduce the risk of injury
from thrown objects,
always wear a face shield
and safety glasses.
Warning! A face shield
alone does not provide adequate eye
protection.
Wear hearing protection, e.g. ear plugs
or ear muffs.
Wear heavy-duty
gloves, preferably made
of leather.
STIHL offers a comprehensive range of
safety clothing and equipment for
personal protection.
Transporting the Power Tool
Always switch off the power tool and
unplug it from the power supply.
Carry the unit hanging from the shoulder
strap or properly balanced by the drive
tube or loop handle.
By vehicle: Properly secure the power
tool to prevent turnover and damage.
To Next Page
Loading...
