To Next PageTo Next PageHow to fix if distance between Stihl HLA 66 battery and mobile device is too long?
If the distance between your Stihl Trimmer's battery and your mobile device is too long, reduce the distance. If the battery still cannot be found with the STIHL connected app, contact a STIHL authorized dealer for assistance.
How to activate Bluetooth on Stihl HLA 66 Trimmer?
To activate Bluetooth on your Stihl Trimmer, activate the Bluetooth radio interface on the battery or your mobile device.
How to fix no electrical contact between Stihl Trimmer and battery?
To fix a lack of electrical contact between your Stihl Trimmer and its battery, remove the battery. Clean the electrical contacts in the battery compartment, and then reinsert the battery.
Why won't my Stihl Trimmer start?
Several factors can prevent your Stihl Trimmer from starting: the battery may have a low charge (recharge it fully), it might be too hot or too cold (remove the battery and allow it to cool down or warm up), there may be no electrical contact between the trimmer and battery (remove the battery and clean the contacts in the battery compartment before refitting it), the trimmer or battery could be damp (allow them to dry), the cutting blades may not run freely (spray both sides of the blades with STIHL resin solvent), the trimmer might be too hot (remove the battery and let the trimmer cool down), there may be a malfunction in the battery (remove and reinsert the battery), or there could be a general malfunction in the trimmer (remove the battery, clean the contacts, refit the battery).
How to fix 1 LED flashing green on Stihl HLA 66?
If 1 LED is flashing green on your Stihl Trimmer, the battery has a low charge. Recharge the battery fully as described in the instruction manual for the STIHL AL 101, 300, 500 chargers.
What does it mean when 1 LED glows red on a Stihl Trimmer?
If 1 LED glows red on your Stihl Trimmer, it indicates that the battery is either too hot or too cold. Remove the battery and allow it to cool down or warm up as necessary.
Why are 3 LEDs glowing red on my Stihl HLA 66?
If 3 LEDs glow red on your Stihl Trimmer, it means the hedge trimmer is too hot. Remove the battery and allow the hedge trimmer to cool down.
What to do if 3 LEDs flash red on Stihl HLA 66 Trimmer?
If 3 LEDs are flashing red on your Stihl Trimmer, it could indicate a malfunction or that the cutting blades aren't running freely. Remove the battery, clean the contacts, and reinsert the battery. If the issue continues, spray the blades with STIHL resin solvent. If the problem persists, do not use the hedge trimmer and contact your STIHL dealer for assistance.
What does it mean when 4 LEDs flash red on a Stihl HLA 66?
If 4 LEDs flash red on your Stihl Trimmer, there may be a battery malfunction, poor electrical contact, or the trimmer/battery is damp. Try removing and reinserting the battery. Also, clean the contacts in the battery compartment and ensure both the trimmer and battery are dry.
Why Stihl Trimmer runtime is too short?
A short runtime on your Stihl Trimmer could be due to a battery that isn't fully charged or because the battery has reached the end of its normal life. Try fully recharging the battery. If the issue persists, consider replacing the battery.
General| Battery Type | Lithium-Ion |
|---|---|
| Power source | Battery |
| Battery voltage | 36 V |
| Vibration level left/right | 2.5/2.5 m/s² |
| Blade Length | 20 inches |
| Stroke Rate | 3, 000 spm |
Specific safety warnings tailored for hedge trimmer operation and extended reach models.
Specifies the necessary personal protective equipment for safe operation.
Details safe practices for operating the hedge trimmer, including handling and conditions.
Lists important warnings and instructions for safe battery handling and usage.
Outlines the specific preparations required for the hedge trimmer before use.
Step-by-step guide for correctly inserting the battery into the tool.
Step-by-step guide for safely removing the battery from the tool.
Details the steps required to safely start and stop the hedge trimmer.
Instructions for adjusting the cutting blade angle for optimal use.
Explains how to adjust the drive tube length on the HLA 86 model.
Detailed instructions on how to use the hedge trimmer in various cutting scenarios.
Covers inspection and maintenance procedures for the hedge trimmer unit.
Details inspection and maintenance for the cutting blades.
