17HS 85
English / USA
If the engine is low on power, check the
spark arresting screen* inside the
muffler.
Warning: Wait for the engine to cool
down completely before performing this
work.
: Remove the shroud.
Take out the screw (1).
: Remove the spark arresting
screen (2).
* see “Guide to Using this Manual”
: Clean spark arresting screen if
necessary.
: If screen is damaged or coked up, fit
a new one.
: Refit the spark arresting screen.
: Fit the shroud.
Wrong fuel mix (too much engine oil in
the gasoline), a dirty air filter and
unfavorable running conditions (mostly
at part throttle etc.) affect the condition of
the spark plug. These factors cause
deposits to form on the insulator nose
which may result in trouble in operation.
Spark Arresting Screen in
Muffler
1
366BA026 KN
2
366BA027 KN
Checking the Spark Plug
000BA002 KN
To Next Page
Loading...
