EasyManua.ls Logo

Stihl HS 85 - Specifications

Stihl HS 85
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
English / USA
HS 85
EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category:
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
Moderate = 50 hours
Weight (complete unit)
Engine
Ignition System
Fuel System
Rewind Starter
Cutting blade sharpening angle
45° to horizontal
HS 85/24" 11.7 lb (5.3 kg)
HS 85/30" 12.6 lb (5.5 kg)
HS 85/40" 12.5 lb (5.7 kg)
Specifications
Single cylinder two-stroke engine
Displacement: 1.55 cu.in
(25.4 cm
3
)
Bore: 1.34 in
(34 mm)
Stroke: 1.10 in
(28 mm)
Idle speed: 2800 rpm
Typ: Electronic magneto ignition
Spark plug
(suppressed): Bosch WSR 6 F
or
NGK BPMR 7 A;
Electrode gap: 0.02 in (0.5 mm)
Spark plug thread: M 14 x 1.25;
0.37 in (9.5 mm)
long
Carburetor: All position diaphragm
carburetor with integral fuel pump
Air filter: Foam and felt
elements
Fuel tank capacity: 12.6 fl.oz. (0.37 l)
Fuel mix: See “Fuel”
Starter rope: 0.11 in dia., 31.5 in
(2.7 mm dia.,
800 mm)

Related product manuals